Select Page

China best Double Acting Spring Loaded Pneumatic Hydraulic Cylinder vacuum pump belt

Product Description

Product Description

CW-A-10T Overall Dimension
Total Stroke Power Stroke L L1 L2
50 5 305 480 393
100 5 355 580 443
150 5 405 680 493
200 5 455 780 543
         
50 10 305 480 457
100 10 355 580 507
150 10 405 680 557
200 10 455 780 607
         
50 15 305 480 521
100 15 355 580 571
150 15 405 680 621
200 15 455 780 671
         
50 20 305 530 635
100 20 355 580 635
150 20 405 680 685
200 20 455 780 735

Specification

Action type Double action
Action pressure Clean compressed air of 3-7kg/cm²
Action-wear hydraulicoil Anti-wear hydraulic oil of VG 68#
Operation temperature 0-55ºC
Operating speed 10-400mm/s
Anti-pressure of oil tank 300kg/cm²
Anti-pressure of pneumatic cylinder 12kg/cm²
Prepress stroke tolerance +1.00mm 0.00mm
Power stroke tolerance +0.20mm 0.00mm
Operation frequency 10-50 times (related to the specific pre-pressure and booster stroke)
High pressure Boosting force 1-80T(the actual output tonnage according to the customer demand)

Product Features

 Working Principle

   pneumatic cylinder is combined the oil pressure cylinder and booster together for taking pure gas press as the power source. It makes use of the different size of booster, the crosssection area compression ratio and Pascal energy conservation principle. Because of constant pressure, when the compression area change from small to large, the press would vary with the size, so as to raise the gas pressure to tens. Taking the prepress standard hydro pneumatic cylinder as an example: When the work gas pressed on the hydraulic oil (or working piston) surface, hydraulic oil would flow to the approach stroke cavity because of the air pressure, then the hydraulic oil would promote the workpiece to move rapidly. When the workpiece is meet the resistance larger than the gas pressure, it stops moving. At this point, the booster cavity start moving because of the signal (or pneumatic signal), then achieve the purpose of moding products!

Features:

  1.Fast speed: The action speed is faster than the hydraulic drive and it is more stability than pneumatic drive;
  2.High output: It can reach the highest output of oil hydraulic machine under same conditions, which can not be achieved by the pure pneumatic           machine;
  3.Low price: The price is lower than the oil pressure system;
  4.Easy to maintain: The simple structure is easier to maintain than the oil pressure system;
  5.Low energy consumption: When continue to boost or stop moving, it does not need the motor to keep working as the hydraulic system,
    then the energy can be saved. And it is convenient to take the power source, so the actual energy     
    consumption is equivalent to 10%-30% of hydraulic power system;
  6.No leakage: Energy conversion is easy with zero leakage, so not worry about the environmental pollution;
  7.No harm to the die: In order to meet the technology needs, stamping pressure and the work stroke can keep within the provided area without             adjustable levels;
  8.Soft landing: Soft-stamping technology reduce the noise to protect the die;
  9.Fault less: No temperature rising problems unlike the hydraulic system;
10.Small space: Space area can be less than 50% compare with normal air cylinder and hydraulic station;
 

Factory Display

Packaging

 

Company Introduction

      CHINAMFG Machinery Equipment Co.,Ltd supply a wide range of high quality punching machine, hydraulic press machine, automatic riveting machine,eyelet punching machine, hydro pneumatic press machine,air liquid booster pump, pneumatic hydraulic components and other automation equipment. Committed to the complete solution from design to manufacturing to meet customer demand.
      Our company has a professional technical team, nearly 30 years of experience in this area. Our products are widely used in aerospace, new energy, automobile and boating, petrochemical, mold, clothing and other fields.Our products are exported to Europe, South America, North America, southeast Asia, South Africa and other places.
      CHINAMFG has always adhered to the principle of "Integrity, Professionalism, Technology and Innovation",to provide high quality solutions to the customers and all aspects of service, strive to make the world love made in China.Corporate Philosophy: Integrity as Root, Customer-Based Culture; Science and Technology Innovation. Sharina and Co-Win.

Certifications

Professional technical team, nearly 30 years of industry experience;

Lean production management mode combines market demand, product research and development, production and manufacturing.pre-sales quality and after-sales service; 

Advanced equipment, mature technology, with a number of independent intellectual vproperty rights;

Complete quality control, assured quality, from raw material procurement,production process control, to finished product inspection, packaging, full field monitoring traceability, to ensure that every product qualified;

Has 3 specialized processing and manufacturing factories, sufficient inventory, short delivery time;

Support customized, design according to customer requirements to meet the diversified demand of customers;

Perfect after-sales service system and after-sales quality tracking system;

Professional sales system, rich experience in export related operation process.
 

Material: Steel
Usage: Automation and Control
Structure: Piston Cylinder
Power: Pneumatic
Standard: Nonstandard
Pressure Direction: Double-acting Cylinder
Customization:
Available

|

hydraulic cylinder

How do hydraulic cylinders compare to other methods of force generation like electric motors?

Hydraulic cylinders and electric motors are two different methods of force generation with distinct characteristics and applications. While both hydraulic cylinders and electric motors can generate force, they differ in terms of their working principles, performance attributes, and suitability for specific applications. Here's a detailed comparison of hydraulic cylinders and electric motors:

1. Working Principle:

- Hydraulic Cylinders: Hydraulic cylinders generate force through the conversion of fluid pressure into linear motion. They consist of a cylinder barrel, piston, piston rod, and hydraulic fluid. When pressurized hydraulic fluid enters the cylinder, it pushes against the piston, causing the piston rod to extend or retract, thereby generating linear force.

- Electric Motors: Electric motors generate force through the conversion of electrical energy into rotational motion. They consist of a stator, rotor, and electromagnetic field. When an electrical current is applied to the motor's windings, it creates a magnetic field that interacts with the rotor, causing it to rotate and generate torque.

2. Force and Power:

- Hydraulic Cylinders: Hydraulic cylinders are known for their high force capabilities. They can generate substantial linear forces, making them suitable for heavy-duty applications that require lifting, pushing, or pulling large loads. Hydraulic systems can provide high force output even at low speeds, allowing for precise control over force application. However, hydraulic systems typically operate at lower speeds compared to electric motors.

- Electric Motors: Electric motors excel in providing high rotational speeds and are commonly used for applications that require rapid motion. While electric motors can generate significant torque, they tend to have lower force output compared to hydraulic cylinders. Electric motors are suitable for applications that involve continuous rotary motion, such as driving conveyor belts, rotating machinery, or powering vehicles.

3. Control and Precision:

- Hydraulic Cylinders: Hydraulic systems offer excellent control over force, speed, and positioning. By regulating the flow of hydraulic fluid, the force and speed of hydraulic cylinders can be precisely controlled. Hydraulic systems can provide gradual acceleration and deceleration, allowing for smooth and precise movements. This level of control makes hydraulic cylinders well-suited for applications that require precise positioning, such as in industrial automation or construction equipment.

- Electric Motors: Electric motors also offer precise control over speed and positioning. Through motor control techniques such as varying voltage, frequency, or pulse width modulation (PWM), the rotational speed and position of electric motors can be accurately controlled. Electric motors are commonly used in applications that require precise speed control, such as robotics, CNC machines, or servo systems.

4. Efficiency and Energy Consumption:

- Hydraulic Cylinders: Hydraulic systems can be highly efficient, especially when properly sized and designed. However, hydraulic systems typically have higher energy losses due to factors such as fluid leakage, friction, and heat generation. The overall efficiency of a hydraulic system depends on the design, component selection, and maintenance practices. Hydraulic systems require a hydraulic power unit to pressurize the hydraulic fluid, which consumes additional energy.

- Electric Motors: Electric motors can have high efficiency, especially when operated at their optimal operating conditions. Electric motors have lower energy losses compared to hydraulic systems, primarily due to the absence of fluid leakage and lower friction losses. The overall efficiency of an electric motor depends on factors such as motor design, load conditions, and control techniques. Electric motors require an electrical power source, and their energy consumption depends on the motor's power rating and the duration of operation.

5. Environmental Considerations:

- Hydraulic Cylinders: Hydraulic systems typically use hydraulic fluids that can pose environmental concerns if they leak or are not properly disposed of. The choice of hydraulic fluid can impact factors such as biodegradability, toxicity, and potential environmental hazards. Proper maintenance and leak prevention practices are essential to minimize the environmental impact of hydraulic systems.

- Electric Motors: Electric motors are generally considered more environmentally friendly since they do not require hydraulic fluids. However, the environmental impact of electric motors depends on the source of electricity used to power them. When powered by renewable energy sources, such as solar or wind, electric motors can offer a greener solution compared to hydraulic systems.

6. Application Suitability:

- Hydraulic Cylinders: Hydraulic cylinders are commonly used in applications that require high force output, precise control, and durability. They are widely employed in industries such as construction, manufacturing, mining, and aerospace. Hydraulic systems are well-suited for heavy-duty applications, such as lifting heavy objects, operating heavy machinery, or controlling large-scale movements.

- Electric Motors: Electric motors are widely used in various industries and applications that require rotational motion, speed control, and precise positioning. They are commonly found in appliances, transportation, robotics, HVAC systems, and automation. Electric motorsare suitable for applications that involve continuous rotary motion, such as driving conveyor belts, rotating machinery, or powering vehicles.In summary, hydraulic cylinders and electric motors have different working principles, force capabilities, control characteristics, efficiency levels, and application suitability. Hydraulic cylinders excel in providing high force output, precise control, and durability, making them ideal for heavy-duty applications. Electric motors, on the other hand, offer high rotational speeds, precise speed control, and are commonly used for applications that involve continuous rotary motion. The choice between hydraulic cylinders and electric motors depends on the specific requirements of the application, including the type of motion, force output, control precision, and environmental considerations.

hydraulic cylinder

What considerations are important when selecting hydraulic cylinders for mobile equipment?

To select hydraulic cylinders for mobile equipment, several important considerations need to be taken into account. Here are the key factors to consider:

  1. Load Capacity: Determine the maximum load or force that the hydraulic cylinder will need to support. This includes both the static load and any dynamic or shock loads that may be encountered during operation.
  2. Stroke Length: Consider the required stroke length, which is the distance the hydraulic cylinder can extend and retract. Ensure that the stroke length is sufficient for the specific application and range of motion needed.
  3. Operating Pressure: Determine the maximum operating pressure required for the hydraulic system. This will depend on the load and the specific application. Select a hydraulic cylinder with a pressure rating that exceeds the maximum operating pressure to ensure safety and durability.
  4. Mounting Style: Consider the available space and the mounting requirements of the mobile equipment. Hydraulic cylinders come in various mounting styles, such as flange, trunnion, clevis, and pivot, among others. Choose a mounting style that is compatible with the equipment and provides the necessary support and stability.
  5. Size and Weight: Take into account the physical dimensions and weight of the hydraulic cylinder. Ensure that it can fit within the available space and that the equipment can support its weight without compromising performance or safety.
  6. Speed and Precision: Evaluate the required speed and precision of the hydraulic cylinder's movement. Different cylinder designs and configurations can affect the speed and accuracy of motion. Consider factors such as cylinder bore size, rod diameter, and the presence of cushioning or dampening features.
  7. Environmental Factors: Assess the operating environment of the mobile equipment. Consider factors such as temperature extremes, exposure to moisture, dust, and chemicals. Select hydraulic cylinders with appropriate seals and coatings that can withstand the environmental conditions and prevent corrosion or damage.
  8. Reliability and Maintenance: Consider the reliability and maintenance requirements of the hydraulic cylinders. Look for reputable manufacturers that provide high-quality products with a proven track record. Evaluate factors such as expected service life, availability of spare parts, and ease of maintenance.
  9. Cost: Finally, consider the cost of the hydraulic cylinders, including the initial purchase price, installation costs, and long-term maintenance expenses. While it is essential to find a cost-effective solution, prioritize quality and performance to ensure safe and efficient operation.

hydraulic cylinder

What maintenance practices are essential for extending the lifespan of hydraulic cylinders?

Maintaining hydraulic cylinders is crucial for extending their lifespan and ensuring optimal performance. Regular maintenance helps prevent premature wear, damage, and failure, ultimately reducing downtime and saving costs. Here are some essential maintenance practices to consider for extending the lifespan of hydraulic cylinders:

1. Regular Inspections:

- Conduct routine visual inspections of hydraulic cylinders to identify any signs of damage, leaks, or wear. Inspect the cylinder body, piston rod, seals, and mounting points. Look for fluid leaks, rust, dents, or any abnormal wear patterns. Early detection of issues allows for timely repairs or replacements, preventing further damage and extending the lifespan of the cylinder.

2. Cleanliness:

- Maintain a clean environment around hydraulic cylinders to prevent contaminants from entering the system. Dust, dirt, and debris can damage seals and other internal components, leading to accelerated wear and reduced performance. Regularly clean the cylinder and its surroundings to minimize the risk of contamination.

3. Proper Lubrication:

- Adequate lubrication is critical for the smooth operation and longevity of hydraulic cylinders. Follow the manufacturer's recommendations for lubrication intervals and use the appropriate lubricant. Apply lubrication to the cylinder's moving parts, such as the piston rod, to reduce friction and minimize wear.

4. Seal Maintenance:

- Seals play a vital role in preventing hydraulic fluid leaks and maintaining the cylinder's performance. Inspect and replace worn or damaged seals promptly. Ensure that seals are properly installed and lubricated. Regularly clean the seal grooves to remove any debris that could compromise seal effectiveness.

5. Pressure Checks:

- Periodically check the hydraulic system's pressure to ensure it is within the recommended operating range. Excessive pressure can strain the cylinder and its components, leading to premature wear. Monitor pressure levels and make adjustments as necessary to prevent overloading the cylinder.

6. Control Valve Maintenance:

- Maintain and inspect control valves that regulate the flow and direction of hydraulic fluid. Ensure that the valves are functioning correctly and not causing excessive stress or pressure spikes in the cylinder. Clean or replace control valves if they are damaged or malfunctioning.

7. Cylinder Alignment:

- Proper alignment of hydraulic cylinders is essential for their longevity. Misalignment can cause excessive side loads, leading to uneven wear and potential damage. Ensure that the cylinder is correctly aligned with other components and that the mounting points are secure.

8. Preventing Overloading:

- Avoid subjecting hydraulic cylinders to loads exceeding their rated capacity. Overloading can cause internal damage, seal failure, and reduced lifespan. Ensure that the load requirements are within the cylinder's capabilities and consider using safety devices like overload protection systems when necessary.

9. Training and Operator Awareness:

- Provide proper training to equipment operators on the correct use and handling of hydraulic cylinders. Operators should be aware of the cylinder's limitations, safe operating procedures, and the importance of regular maintenance. Promote a culture of proactive maintenance and encourage operators to report any potential issues promptly.

10. Documentation and Record-Keeping:

- Maintain detailed documentation of all maintenance activities, including inspections, repairs, and replacements. Keep records of lubrication schedules, pressure checks, and any maintenance performed on the hydraulic cylinders. This documentation helps track the cylinder's history, identify recurring issues, and plan future maintenance effectively.

By following these maintenance practices, hydraulic cylinder lifespan can be extended, ensuring reliable performance and reducing the risk of unexpected failures. Regular inspections, cleanliness, proper lubrication, seal maintenance, pressure checks, control valve maintenance, cylinder alignment, preventing overloading, operator training, and documentation contribute to the overall longevity and optimal functioning of hydraulic cylinders.

China best Double Acting Spring Loaded Pneumatic Hydraulic Cylinder   vacuum pump belt	China best Double Acting Spring Loaded Pneumatic Hydraulic Cylinder   vacuum pump belt
editor by CX 2023-11-21